more G-Labs products

Author Topic: Z-wave error  (Read 1522 times)

December 30, 2015, 02:52:25 PM
Read 1522 times

emerich

  • ***
  • Information
  • Full Member
  • Posts: 73
Hi Gene,

when I tried to figure out some X10 problems in the log (extra topic) I found the following Error messages.

"2015-12-30 13:50:26.3047 Debug NodeUpdated (NodeId=18, Parameter=SensorMotion, Value=255)
2015-12-30 13:50:26.3086 Info HomeAutomation.ZWave   18   ZWave Node   Sensor.MotionDetect   255
2015-12-30 13:50:26.3087 Debug 01-0D-00-04-00-14-07-56-01-30-03-FF-D1-CB-64
2015-12-30 13:50:26.3147 Debug ZWaveMessage (RawData=01-0D-00-04-00-14-07-56-01-30-03-FF-D1-CB-64)
2015-12-30 13:50:26.3180 Debug ZWaveMessage (Direction=Inbound, Header=SOF, NodeId=20, Type=Request, Function=ApplicationCommandHandler, CommandClass=Crc16Encapsulated)
2015-12-30 13:50:26.3210 Debug 06
CRC16 encapsulated message: 30-03-FF
2015-12-30 13:50:26.3277 Error System.NullReferenceException: Object reference not set to an instance of an object
  at ZWaveLib.CommandClasses.SensorBinary.GetEvent (ZWaveLib.ZWaveNode node, System.Byte[] message) [0x00000] in <filename unknown>:0
  at ZWaveLib.CommandClasses.Crc16Encapsulated.ProcessEncapsulatedMessage (ZWaveLib.ZWaveNode node, System.Byte[] encapMessage) [0x00000] in <filename unknown>:0
  at ZWaveLib.CommandClasses.Crc16Encapsulated.GetCrc16EncapEvent (ZWaveLib.ZWaveNode node, System.Byte[] message) [0x00000] in <filename unknown>:0
  at ZWaveLib.CommandClasses.Crc16Encapsulated.GetEvent (ZWaveLib.ZWaveNode node, System.Byte[] message) [0x00000] in <filename unknown>:0
  at ZWaveLib.ZWaveNode.ApplicationCommandHandler (System.Byte[] rawMessage) [0x00000] in <filename unknown>:0
2015-12-30 13:50:26.3317 Warn Unhandled message type: 01-0D-00-04-00-14-07-56-01-30-03-FF-D1-CB-64
"
More of the logfile you can find in the attached log.
The error occures with both of my multi sensors (id 20 Fibaro Multisensor 010F:0800:1001 / id 20 gen5 Multisensor 0086:0002:004A).

Do you have any idea?

Thanks
Christian

January 04, 2016, 11:21:16 PM
Reply #1

gbremmer

  • *
  • Information
  • Newbie
  • Posts: 23
Hi Emerich,

This is the same problem as Z-wave via razberry on RPI not working properly.
Hopefully Gene or somebody else can have a look at our problems.

January 05, 2016, 08:49:13 AM
Reply #2

emerich

  • ***
  • Information
  • Full Member
  • Posts: 73
Hi,

thanks for the info, I read the "Z-wave via razberry on RPI not working properly" but didn't figure out that the problem is the same.

Thanks for the info!!!

So lets follow the other thread and skip this one!!  :) :)

br. Christian

January 05, 2016, 03:00:06 PM
Reply #3

dani

  • *****
  • Information
  • Global Moderator
  • Posts: 535
I am using HG with Raspberry Pi2 and AEONLabs ZStick 2 an AEONLabs Gen 5 and it works with Fibaro, Qubino and AEONLabs equipment. Perhaps some msg not interpreted by ZWaveLib_Dotnet of Gene, but no crash and no order and sensor data lost.

January 05, 2016, 07:36:23 PM
Reply #4

gbremmer

  • *
  • Information
  • Newbie
  • Posts: 23
I think it's the combination of RaZberry and Raspberry Pi. I also similair problems on the Razberry site:
http://razberry.z-wave.me/index.php?id=29
Yesterday i've done a full reset but still no response.

Who can assist? I can deliver all the required logging.

January 07, 2016, 07:19:08 PM
Reply #5

gbremmer

  • *
  • Information
  • Newbie
  • Posts: 23
Gene, can you assist? Do you know what to do?

January 07, 2016, 07:35:55 PM
Reply #6

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Sorry gbremmer I don't have either Fibaro Multisensor nor RaZberry, so can't help much on this.

Cheers,
g.