Z-wave switch not updating state

[maxflax]

The device is working and I can toggle on/off from Homegenie so don't know how associating it again will help.
My thought would be to force it detected as the right device.

[mvdarend]

I've just updated to r503 and the problems with the Fibaro RGBW module seem to have been resolved. 

[Gene]

Hi mvdarend,

if you have some time, please help testing new ZWaveLib so to ensure we all have issues fixed with it

https://sourceforge.net/projects/homegenie/files/testing/

Ensure not to have any other ZWaveLib.dll in the main homegenie folder nor in the homegenie/lib folder.
This file must be copied over the one in the homegenie/lib/mig folder.

g.

[mvdarend]

Hi Gene,

I've overwritten the file in homegenie/lib/mig (the other two folders didn't have a ZWaveLib.dll file).

Stopped the HomeGenie service before copying and then restarted, so far all looks OK. The modifications I made earlier for HomeGenie Plus and the Fibaro RGBW also are working well.

I'll keep an eye on it for the next few days.

[maxflax]

Is there a way to set the device manually to another device since it's detecting wrong from the pepper database?

[jshan]

Problem: Z-wave EcoLink motion sensor not updating

Previously, I had migrated from r493 where motion sensor worked, to r501 where I got timeouts and motion sensor was not responsive.

Updated to r503, rPi, Mono 3.2.8, replaced ZWaveLib.dll per Gene's post

Timeouts still occur.

Now as well, HG does not update the sensor widget and it is stuck with the motion indicator (see attached).  I also notice some other icons on the r503 widget which I have not see before (bell, Z-1) which were also in r501 but not in r493.

What can I do to debug this?  Or what to look for in the log?

[maxflax]

Had the same with my reeds sensors, turned out I needed to setup them to send back when changed.
Under Associations you have "Add or remove a node in this group" insert 1 and press add.
then check with "Nodes Id in this group" that it is added.

!!If you have more than 1 group Id you may check that your setting this for the right group first!!

[jshan]

Thank you for the quick response, Maxflax.  I looked around in HG and I don't see Associations or the option to add/remove node in this group.  Is this in a file?  Could you point me in the right direction?  Thanks.

[maxflax]

Go to groups, then select your device and there underneath the VM Watt there will be a setup button. This will take you to the setup of the device and there you will find the feature if your device is supported.
You will need to put your device in active state since it's battery driven.

[jshan]

I appreciate your help with this, but it does not appear that my device has this feature - see setup page attached.  I'm open to any other suggestions to try.

[kevin1]

Have all the z-wave issues been resolved in r505 or r507?  I have r505 and unable to get my door and motion sensors working.  They don't seem to be in pepper db though.  Lots of variables here and I am new to z-wave....

[pmowry911]

My issue is slightly different but the same topic, so I didn't want to start a new thread.  None of my Jasco switches are updating state when manually turning a light on and off.  I'm not getting trace error messages, mine show complete.  Here is from the console from turning a switch on/off, but nothing changed in the GUI.  I assume it has to do with CommandClass=NotSet ?

2016-01-09 12:47:16.7486 Debug 01-10-00-49-84-04-0A-04-10-01-25-27-73-70-86-72-77-BB
2016-01-09 12:47:16.7486 Debug ZWaveMessage (RawData=01-10-00-49-84-04-0A-04-10-01-25-27-73-70-86-72-77-BB)
2016-01-09 12:47:16.7486 Debug ZWaveMessage (Direction=Inbound, Header=SOF, NodeId=0, Type=Request, Function=ApplicationUpdate, CommandClass=NotSet)
2016-01-09 12:47:16.7486 Debug 06
2016-01-09 12:47:16.7507 Debug NodeUpdated (NodeId=4, Parameter=NodeInfo, Value=04 10 01 25 27 73 70 86 72 77)
2016-01-09 12:47:16.7518 Info HomeAutomation.ZWave      4       ZWave Node      ZWaveNode.NodeInfo      04 10 01 25 27 73 70 86 72 77
2016-01-09 12:47:16.7518 Trace Complete
2016-01-09 12:47:17.0890 Info WebServiceGateway 192.168.21.5    HTTP    GET     200 /hg/html/pages/control/widgets/homegenie/generic/light.js [OPEN]
2016-01-09 12:47:17.0937 Info WebServiceGateway 192.168.21.5    HTTP    GET     200 /hg/html/pages/control/widgets/homegenie/generic/light.js [CLOSED AFTER 0.005 seconds]
2016-01-09 12:47:17.1191 Info WebServiceGateway 192.168.21.5    HTTP    GET     200 /hg/html/pages/control/widgets/homegenie/generic/light.html [OPEN]
2016-01-09 12:47:17.1222 Info WebServiceGateway 192.168.21.5    HTTP    GET     200 /hg/html/pages/control/widgets/homegenie/generic/light.html [CLOSED AFTER 0.003 seconds]
2016-01-09 12:47:18.9295 Info WebServiceGateway 192.168.21.5    HTTP    GET     200 /api/HomeAutomation.HomeGenie/Config/Interfaces.List/ [OPEN]
2016-01-09 12:47:18.9313 Info WebServiceGateway 192.168.21.5    HTTP    GET     200 /api/HomeAutomation.HomeGenie/Config/Interfaces.List/ [CLOSED AFTER 0.002 seconds]
2016-01-09 12:47:19.5622 Debug 01-10-00-49-84-04-0A-04-10-01-25-27-73-70-86-72-77-BB
2016-01-09 12:47:19.5622 Debug ZWaveMessage (RawData=01-10-00-49-84-04-0A-04-10-01-25-27-73-70-86-72-77-BB)
2016-01-09 12:47:19.5622 Debug ZWaveMessage (Direction=Inbound, Header=SOF, NodeId=0, Type=Request, Function=ApplicationUpdate, CommandClass=NotSet)
2016-01-09 12:47:19.5626 Debug 06
2016-01-09 12:47:19.5626 Debug NodeUpdated (NodeId=4, Parameter=NodeInfo, Value=04 10 01 25 27 73 70 86 72 77)
2016-01-09 12:47:19.5637 Trace Complete

[rg2k]

Hi All,

The Fibaro Multi-Instance switches are still not working with ZWaveLib 1.0.12. Tested it on a Pi and Windows. They work if manually triggered but not via Smart Lights, etc.

Unfortunately the logs do not give any idea of what's wrong.

Any idea what could still be causing this?