HomeGenie Forum

General Category => Troubleshooting and Support => Topic started by: KaZe on June 17, 2015, 11:19:26 AM

Title: Aeotec By Aeon Labs Gen5 Z-wave Plus 6-in-1 Multisensor 6 ZW100-A
Post by: KaZe on June 17, 2015, 11:19:26 AM

The new Aeotec By Aeon Labs Gen5 Z-wave Plus 6-in-1 Multisensor 6 ZW100-A supported by HomeGenie?

http://aeotec.com/z-wave-sensor (http://aeotec.com/z-wave-sensor)

Title: Re: Aeotec By Aeon Labs Gen5 Z-wave Plus 6-in-1 Multisensor 6 ZW100-A
Post by: amji71 on July 24, 2015, 04:38:03 AM

I have the same question.  I just bought the sensor and would love for it to work...  is there an update available?
This is the device and it is listed in the pepperone DB.  Perhaps we need an update?
http://www.pepper1.net/zwavedb/device/741 (http://www.pepper1.net/zwavedb/device/741)
THANKS!

Title: Re: Aeotec By Aeon Labs Gen5 Z-wave Plus 6-in-1 Multisensor 6 ZW100-A
Post by: frank-1902 on July 25, 2015, 09:57:29 PM

I got mine in today.

I had no problem including it to HG. But I got no readings at first.
Turns out that the reporting interval (parameter 111) was set to 3600 sec thus 1 hour. After I changed it to 5 min. I now have all the sensor values except for UV.

The manual is very skimpy but all nessesary parameters are there.

I hope you get yours working also.

Cheers.

Title: Re: Aeotec By Aeon Labs Gen5 Z-wave Plus 6-in-1 Multisensor 6 ZW100-A
Post by: KaZe on July 27, 2015, 10:48:15 AM

What device is connected to your multisensor 6 sensor? Z-wave stick? If yes, which version?

Title: Re: Aeotec By Aeon Labs Gen5 Z-wave Plus 6-in-1 Multisensor 6 ZW100-A
Post by: frank-1902 on July 27, 2015, 07:00:58 PM

I am running HG on a raspi with an Aeon Labs Z-Stick Series 2.