HomeGenie Forum
General Category => Stories => Topic started by: KaZe on January 13, 2017, 11:42:51 AM
-
Hi Everyone!
I start the full house renovation, so I decided, I make the smart house based on HomeGenie. 8)
I thought I would share with you the experience and the process of developing. :)
The plan:
Devices:
- 1xHG server (Ubuntu linux 16.04.1)
- 3xAlpha smart relays(8relays)
- 1xZ-Wave stick Gen5
- 2xZ-Wave multisensor
- 5xZ-Wave door/windows sensor
- 6xZ-Wave Heatit floor thermostat
- 5xZ-Wave Fibaro Roller Shutter2
- 1xZ-Wave Wall Dimmer
- 1xMiLight Bridge with 4 led strip
- 2xIP Cameras
Controller devices:
- android phones
- Amazon Echo dot
- Harmony Hub
- MiLight Bridge
-
Looking forward to follow this =)
-
Preparing Relay Controllers...
L1...L16 - Lamps
K1...K16 - Wall switches
-
First experience:
1. I created a TCP program to relays controller. It create 8 light virtual switches. The domain HomeAutomation.NetworkRelays. This works fine.
2. I create the other TCP program like the first one. I modify the domain name to HomeAutomation.NetworkRelays2. It's create the new 8 light virtual switches, but It's quarreled with the first TCP program. If I switch the 2. TCP virtual switches, the 1. relay controller change the relay status, not the 2.
The solution:
I changed the domain to Relay2.NetworkRelay2, and It't works fine (I do not understand why :) )
3. I create the 3. TCP program with Relay3.Networkrelays3 domain.
Now the 3 relay controller works fine together.
To be continued ... ;D