Aeon Labs (Aeotec) Z-Wave RGB bulb Gen5

[dani]

Advanced parameters is not clear on about to parameter each color. On fibaro it's a multi dimmer switch for each color. But in the sheet of AEonLabs I don't undesstand how to set the different color.

[mikeH]

My understanding is that there are several modes (White, RGB and mixed) and you have to set the mode of the bulb to RGB prior to trying to control the colors individually.  I'm not sure if they are separate dimmers and to be honest I've been working so much lately I haven't had time to experiment.

[mikeH]

A firmware update has been uploaded here (US only)

http://www.thesmartesthouse.com/products/aeotec-by-aeon-labs-z-wave-plus-led-bulb-gen-5

I am unable to update the firmware however on either of my bulbs!!!  ARGH this is frustrating.

[kall]

HI Guys,

I found a code for the Aeon blub:
https://gist.github.com/mckeed/0854097a0b697302fcc4

I don't know how to program but it can help us.

My Aeon bulb work well except the colors... Aeon LED Manufacturer Specific is a little different 0086:0003:0062

Thanks
Kall

[__Wolf__]

Hi guys,
New here and new to the whole house automation, I have no programing skills what so ever.......

I have one of these AEON RGBW bulbs and was wondering if you go it sorted or not?
I installed the .hgx and can turn on and off but the colour wheel has no effect.
Also I had to change the Manufacturer Specific to 0086:0003:0062

Any help to get this working what be great...

Thanx