TESTING RELEASE

[dani]

Hi Bounz,

Are you or Had you using first version of TimeTable with separate Calendar Widget ?

Dani

[bkenobi]

this is even worse with old rpi models. I hope to have soon a chance of replacing standard compression class with the SharpZipLib which would take few seconds only even on oldest rpi.

g.

Will this make backups quicker as well?  Right now, it takes several minutes to create a backup of my setup due to a large number of APPs but the resulting zip file is well under 1MB.

[Bounz]

I don't see any DaniMail thermostat modules in the default config. Where are these?

Yes, you are right. I've found these modules in my backups. As I found out they appeared in modules.xml between January and October 2015. They looks like:

Code: [Select]

<Module>
    <Name />
    <Description />
    <DeviceType>Thermostat</DeviceType>
    <Domain>HomeAutomation.DaniMail</Domain>
    <Address>1</Address>
    <Properties>
      <ModuleParameter>
        <Name>ModuleTemperature</Name>
        <Value />
        <Description />
        <FieldType />
        <UpdateTime>2015-01-26T21:14:09.633435Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Sensor.Humidity</Name>
        <Value />
        <Description />
        <FieldType />
        <UpdateTime>2015-01-26T21:14:09.635928Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Sensor.Temperature</Name>
        <Value />
        <Description />
        <FieldType />
        <UpdateTime>2015-01-26T21:14:09.635775Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Status.Battery</Name>
        <Value />
        <Description />
        <FieldType />
        <UpdateTime>2015-01-26T21:14:09.636073Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Thermostat.Mode</Name>
        <Value>VPeKVIbfwhwD46IyYU4o6w==</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-09-28T18:33:23.845733Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Thermostat.OperatingState</Name>
        <Value />
        <Description />
        <FieldType />
        <UpdateTime>2015-01-26T21:14:09.63622Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Thermostat.SetPoint.Eco</Name>
        <Value>eOBHtf2p9JGVaJqjziLJBg==</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-09-28T18:33:23.848663Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Thermostat.SetPoint.Heating</Name>
        <Value>tluMAZN0MH3Z5rpZ9FYJ+A==</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-09-28T18:33:23.851866Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Thermostat.SetPoint.NoFrost</Name>
        <Value>Ri1VdDW6uIVO4CPS82EASw==</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-09-28T18:33:23.854706Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>TimeTable.F</Name>
        <Value>M3m/88N37t16WUoTMlpS6g==</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-09-28T18:33:23.857692Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>TimeTable.O</Name>
        <Value>ZIWBXy5mRGRuEte8y0MSqg==</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-09-28T18:33:23.860602Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>TimeTable.S</Name>
        <Value>OGzMiOkGhp0dCVGwLGMY+w==</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-09-28T18:33:23.863824Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>TimeTable.W</Name>
        <Value>1bJd8AxkP04ggqA73hoY+w==</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-09-28T18:33:23.867065Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>VirtualModule.ParentId</Name>
        <Value>512</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-01-27T16:43:34.022886Z</UpdateTime>
      </ModuleParameter>
      <ModuleParameter>
        <Name>Widget.DisplayModule</Name>
        <Value>DaniMail/generic/thermostats</Value>
        <Description />
        <FieldType />
        <UpdateTime>2015-01-26T21:14:09.546372Z</UpdateTime>
      </ModuleParameter>
    </Properties>
    <Stores />
    <RoutingNode />
  </Module>


Are you or Had you using first version of TimeTable with separate Calendar Widget ?

Yes, I have used Timetable with separate Calendar Widget some time ago.

After deleting this entries from modules.xml and restarting service Timetable was broken again (showing no modules in every category).

[KaZe]

Hi Gene!

I installed the 1.1 510 HG. The timetable can't start:

Code: [Select]

"2016-01-05 21:16:36.5187 Info HomeAutomation.HomeGenie.Automation 36 Automation Program Runtime.Error CR: The call is ambiguous between the following methods or properties: `System.Console.WriteLine(char[])' and `System.Console.WriteLine(string)'"

I try compile the program, but nothing change.

[Gene]

KaZe on which system are you running HG?
Anyway you can remove line 143 from the timetable app, it was just for debugging purpose and I forgot removing it.

Cheers,
g.

[KaZe]

KaZe on which system are you running HG?
Anyway you can remove line 143 from the timetable app, it was just for debugging purpose and I forgot removing it.

Cheers,
g.

Hi Gene!

Thx, it's works.
My HG system Linux Ubuntu 15.04

[nolio]

I just test r510, and it doesn't work well on my side :

• Heavy CPU use from <10-15% to more than 50%
• My shutter open each time HG start (probably due to change on timetable and my use of combination of timetable and scheduler in the same time)

So roll back to r509 for now.

[Bounz]

After deleting this entries from modules.xml and restarting service Timetable was broken again (showing no modules in every category).

Well, the solution was as easy as my inattention: the Timetable app didn't start after update/service restart, so no module has "TimeTable.Enable" feature. 

[Gene]

You're right nolio... I've made a little mistake by distraction, forgot to multiply by 1000 the pause of the SchedulerService :/

https://github.com/genielabs/HomeGenie/compare/v1.1-beta.509...master#diff-ff986620e87a45b15130d3a29491b39eR52

going to fix...

g.

[Jens]

Hello Gene

did you add X10 on for shutters/dimmers - I can't see it in r511?

The timetable programm was running fine in 508, with 509 the program already stopped twice by itself. I have currently just one hue light (# 4) being controlled by the timetable.

r511 is currently just installed on my test raspberry, so I cannot tell anything in regards to stability yet.


Thanks
Jens

[Gene]

Sorry Jens, forgot once again I'll remember for next release. R511 should solve stability issues of the timetable I hope. I'm running it since 1 am, too early yet to be sure

[pim555]

Upgraded from r509 to r510
- Zwave stopped working

Upgraded from r510 to r511
- Zwave working again
- Zone sensors confirmed working as part of smart lights, nice job !
- Backup file creation on RPI model B significantly improved!

Nice additions, thanks. Still puzzled why after updates sometimes Zwave does not properly come back on (using RPI + Razberry so could be related to this combination?)


Cheers
Pim

[Gene]

did you add X10 on for shutters/dimmers - I can't see it in r511?

The timetable programm was running fine in 508, with 509 the program already stopped twice by itself. I have currently just one hue light (# 4) being controlled by the timetable.

r511 is currently just installed on my test raspberry, so I cannot tell anything in regards to stability yet.

Hi Jens,

I just released r511a update that fixes a bug in the TimeTable (the program it was stopping at midnight) and also add the "ON" option for shutters/dimmers.

Cheers.
g.

[KaZe]

Hi Gene!

I can't update 510 to 511a. I think it is a decompressing error.
My system Linux x64 (Ubuntu 15.04)

[Jens]

Hi Gene,

thanks for implementing X10 ON, the SW12 shutters now work with the timetable.
…and it did not crash anymore during nighttime.

Regards
Jens