HomeGenie Forum

General Category => Troubleshooting and Support => Topic started by: jcid on February 12, 2015, 01:02:27 AM

Title: Aeon Labs Multisensor Icons
Post by: jcid on February 12, 2015, 01:02:27 AM

 
"Running Man Icon": 479.8
Humidity: 20%
Light: 3%
Temp: 70.5℉
Motion: 0

Can anyone tell me what the picture of a running person depicts with a 479.8 value?? lol

Title: Re: Aeon Labs Multisensor Icons
Post by: domotica86 on March 29, 2015, 04:11:36 PM

I even got an bell icon. Any idea's what these icon's mean?

Title: Re: Aeon Labs Multisensor Icons
Post by: dani on April 07, 2015, 06:09:35 PM

- Bell is Alarm sensor -> coresponding of Sensor.Alarm ZWave parameter received from the node
- Moving man is Motion Sensor -> Corresponding of Sensor.Generic ZWave parameter received from the node
- And the last icon with value 0 in your sample is Status.Level -> For my sensors (Fibaro and Everspring) it's the receive level signal from my aeon zwave key.

Cheers
Dani

Title: Re: Aeon Labs Multisensor Icons
Post by: domotica86 on April 19, 2015, 05:21:46 PM

What does it mean if the running man says 10,8?

Matthias

Title: Re: Aeon Labs Multisensor Icons
Post by: dani on April 19, 2015, 07:40:52 PM

In my case Sensor.Generic balance between 0 when no detection and 255 when I pass in the front of the detector. You have to look at what values your detector sent.

Title: Re: Aeon Labs Multisensor Icons
Post by: NickP on April 22, 2015, 02:55:28 PM

Looks like misconfiguration. The temperature in your screenshot is 10.8C so I suspect the running man is also showing the temperature ;D

I have only ever seen motion be 0 or 255. Check the widget and see what Sensor.Generic is set to.