more G-Labs products

Author Topic: MiLight / EasyBulb Controller  (Read 3445 times)

December 04, 2014, 07:03:04 AM
Read 3445 times

smeghead

  • *
  • Information
  • Newbie
  • Posts: 17
Hi Everyone,

This app implements the control for the MiLight and EasyBulb series of RGBW lights.  The lights are relatively cheap and work pretty well.  Examples are here:
http://www.milight.com/milight-rgbw/
http://www.ledchoice.co.uk/rgbw-bulbs

What you need to do:
Import the app.
Run the app to let the trigger code execute, this creates the options parameters and turns the status of the app to yellow.
Open the options panel and set the IP address of your Wifi MiLight control box (and leave the port at 8899).
Click "restart" and the status of the app should be green.
Create modules!
Each wifi box can only control 4 "groups" of lights, Milight(1) to MiLight(4).  Milight(0) will control ALL light groups.

Limitations:
I have not implemented control for the RGB Only / White Only lights as I don't have any to test.
This only works for MiLight wifi boxes at version 3 upwards (i.e. those with their port set at 8899).
You will need HomeGenie r440 for this to work as it needs UdpClient

Best of luck and happy lighting

Smeghead

December 04, 2014, 01:31:36 PM
Reply #1

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
The script was not working, I made some fixes but cannot verify it since I haven't got the MiLight hardware.
I will include this script with next HG release, but please let me know if it works with the changes.

Cheers,
g.

December 04, 2014, 06:48:23 PM
Reply #2

smeghead

  • *
  • Information
  • Newbie
  • Posts: 17
I've tested your version of the script and it works with the changes, thanks for the help.

Cheers
Smeghead

December 18, 2014, 09:33:04 PM
Reply #3

Bitcraze

  • ***
  • Information
  • Full Member
  • Posts: 73
Hi,

MiLight Bridge: Wifi removed and connected directly to Raspberyy PI:

http://servernetworktech.com/2014/09/limitlessled-wifi-bridge-4-0-conversion-raspberry-pi/


Something to keep in mind, as people have mentioned the Wireless on the Bridge is flaky.

October 09, 2016, 08:54:42 PM
Reply #4

KaZe

  • ****
  • Information
  • Sr. Member
  • Posts: 219
Hi!

I was download the program witg HG 5.25. The On/Off works fine, but if I try to change color, I get the error:
Code: [Select]
{"Title":"MiLight ERROR!","Message":"Input string was not in a correct format."}
Any idea what is the problem?!

Thanks

January 26, 2017, 07:15:53 PM
Reply #5

KaZe

  • ****
  • Information
  • Sr. Member
  • Posts: 219
Hi!

I found the problem, and I repaired it. Now the color change works fine from web interface and android app too. And only white LED function is works fine too. If you want to change the color to white, just switch the white color like in the picture.

Cheers!  8)