HomeGenie Forum

General Category => Troubleshooting and Support => Topic started by: hostcrew on January 28, 2015, 05:41:56 PM

Title: Everspring Sensors
Post by: hostcrew on January 28, 2015, 05:41:56 PM

I just setup a rasberrypi with a razberry Zwave installed the pre built home genie sd package everything is up and running great did all the updates.

Added  2 sensor nodes
1 - everspring hsm02 magnetic switch
2 - everspring hsp02 motion sensor
 
Both have the same problem.
They do nothing unless you trip the tamper switch

What I mean is you can open the door sensor and receive nothing..
trip the tamper switch and it receives OPEN.

Close the door nothing
trip the tamper switch and it receives CLOSED

This is the same with the motion sensor nothing seems to register unless the tamper switch is triggered.

It seems like nothing gets transmitted by the sensors or possibly received by razberry unless the tamper switch is triggered and only then it sends/receives its current state.


Any help would be appreciated

Title: Re: Everspring Sensors
Post by: Gene on January 28, 2015, 05:59:27 PM

If you're using r466, it is a bug that will be fixed with next hg update.

Cheers,
g.

Title: Re: Everspring Sensors
Post by: hostcrew on January 28, 2015, 09:02:40 PM

I have re installed r431 and that got the everspring hsm02 magnetic switch to work perfect.

I still have the same problem with the hsp02 motion sensor.
updates only if i trip the tamper switch.