HomeGenie Forum
Automation Program Plugins and Wizard Scripting => Raspberry Pi GPIO/SPI/I2C => Topic started by: NicoVermeir on December 23, 2014, 08:01:01 AM
-
hi guys, quick question: I've got an Eden board and a Rpi.
I would like to use this with HomeGenie to, for example, switch on my tv.
I've looked at the parts list over at the Eden board page and I'm trying to find all those parts. This is what I got so far:
C1 10-bit ADC,SPI,8-ch,MCP3008-I/P
http://www.mouser.be/ProductDetail/Microchip-Technology/MCP3008-I-P/?qs=sGAEpiMZZMvTvDTV69d2Qm2vjLepl4EnaMdqVThrZKg%3d
D1 TSOP4838 38Khz
http://www.mouser.be/ProductDetail/Vishay-Semiconductors/TSOP4838/?qs=sGAEpiMZZMvAL21a%2fDhxMhls0hOpvmKUXUM4DFUuQKs%3d
Q1 BC337-25RL1G
http://www.mouser.be/ProductDetail/ON-Semiconductor/BC337-25RL1G/?qs=sGAEpiMZZMshyDBzk1%2fWi%2fPUgtclNldlceJV2RZ5%2fmA%3d
CN1 Stacking Header (2x13) Extra Tall
http://www.ebay.com/itm/26-Way-Extra-Tall-GPIO-Header-Connector-Socket-2x13-Way-2-54mm-for-Raspberry-Pi-/171363166943?pt=LH_DefaultDomain_0&hash=item27e60a6adf
these are the parts that I'm having trouble finding the correct ones:
P1 N2510-6002RB Header (2x5)
P2 1x4 2.54 male connector
P3 1x4 2.54 male connector
P4 1x3 2.54 male connector
J1 1x3 2.54 male connector
R1 10Kohm 0.5W resistor
C1 1uF ceramic capacitor
so basically, 2 questions: could someone verify that the parts I already found are correct? and could someone help me find the missing parts? (preferably on mouser.be)
thanks!
-
For IR transceiving you only need following parts:
D1 TSOP4838 38Khz
Q1 BC337-25RL1G NPN
D2 TSAL5300 IR Emitter Photodiode
R1 10Kohm resistor
the R1 resistor is already in place so you don't need it. Also the D2 TSAL5300 I think I've sent it to you along with the board.
You don't need other parts if you want to play just with IR for now.
Cheers,
g.