HomeGenie Forum

General Category => Troubleshooting and Support => Topic started by: michmill on October 13, 2015, 04:34:15 AM

Title: Help with Alarm Panel, AD2USB, and COM port
Post by: michmill on October 13, 2015, 04:34:15 AM

Apologies if this is a noob question, but what value do I use for the COM port for the Alarm Panel program configuration?  The AD2USB is showing up as /dev/ttyUSB1.  The Alarm Panel program is asking for a COM port.  I've tried USB1 and COM1, but neither worked.  HomeGenie is running on Ubuntu Linux.

Do I need to do something additional to map the USB to COM port?  Any help is greatly appreciated.

Cheers,
Mike

Title: Re: Help with Alarm Panel, AD2USB, and COM port
Post by: enterprised on October 13, 2015, 06:08:13 AM

Type     /dev/ttyUSB1    in the comport configuration, this is what works for me.

Title: Re: Help with Alarm Panel, AD2USB, and COM port
Post by: michmill on October 13, 2015, 02:52:49 PM

That worked. Thank you!

Cheers,
Mike