more G-Labs products

Author Topic: Integrate alarm (FA147C) without replacing panel?  (Read 1157 times)

July 31, 2015, 05:43:02 PM
Read 1157 times

Fmstrat

  • **
  • Information
  • Jr. Member
  • Posts: 34
Hi all,

I have the following alarm system:

I would like to integrate my alarm system into HG, and I'm trying to figure out the best method. Does anyone know if there are add-on boards that would work? I know the FA147C has an add-on to support X10 sensors from that manual, but couldn't find anything about exporting the signals to anything.

Ideally, this would work with Z-Wave since that's the only other thing I'm using at the moment.

If I need to replace the board, is there a cost effective way to do that, leveraging the existing keypads? Or is there a way to integrate a keypad that has Z-wave, and keep the existing board?

Thanks!

July 31, 2015, 08:27:07 PM
Reply #1

enterprised

  • ****
  • Information
  • Sr. Member
  • Posts: 101
  • Things are only impossible until they are not
4a 75 73 74 20 61 20 70 65 72 73 6f 6e 20 68 61 76 69 6e 67 20 66 75 6e 20 77 69 74 68 20 68 6f 6d 65 20 61 75 74 6f 6d 61 74 69 6f 6e
enterprised == guytpetj

July 31, 2015, 10:06:30 PM
Reply #2

Fmstrat

  • **
  • Information
  • Jr. Member
  • Posts: 34
This works great with ADEMCO panels.

http://www.homegenie.it/forum/index.php?topic=741.0


This looks extremely promising, thanks. Two questions:
  • Have you ever tried to run this through a non-powerd HUB, I.E. not directly connected to the computer/Rasberry Pi?
  • Are the faults interpretable via "programs" in HG? For instance, if a window sensor faults, does it fire off a code that is recognizable for which sensor is triggered that could be used to automate a function in that room?

Thanks!

August 01, 2015, 03:13:51 AM
Reply #3

enterprised

  • ****
  • Information
  • Sr. Member
  • Posts: 101
  • Things are only impossible until they are not
1). I have not tried that, but as far as I know the AD2USB is powered by the alarm panel. I run this with USB over a 100ft Ethernet cable without problems.

2). HG, using this app, create virtual sensor for each alarm sensor so you can use it to drive events. Fore example I use the garage door sensor to switch on the garage lights and I created an additional app that makes HG say things like "Front Door Open" based on the virtual sensors.
4a 75 73 74 20 61 20 70 65 72 73 6f 6e 20 68 61 76 69 6e 67 20 66 75 6e 20 77 69 74 68 20 68 6f 6d 65 20 61 75 74 6f 6d 61 74 69 6f 6e
enterprised == guytpetj