HomeGenie Forum
General Category => Troubleshooting and Support => Topic started by: kiwi799 on July 07, 2014, 10:11:19 PM
-
hello, I use HG with a wall mounted switch TKB TD66Z. The module TD66Z once associated to a ZWave network, can be associated to 4 groups. TD66Z has node id 2.
Pressing left button of TD66Z will send a ALL ON command to all device associated to group1.
Pressing right button of TD66Z will send a ALL ON command to all device associated to group2.
I associated a first AeoTec Micro switch G2 (currently Zwave node4) to group1 on TD66Z.
I associated a second AeoTec Micro switch G2 (currently Zwave node5) to group2 on TD66Z.
Each AeoTec switch is wire to a light.
So as I can control each light from HG and also can control it directly with the mounting wall switch.
Currently I can turn on/off the light from HG and also from the mouting wall. However when actionning the mounting wall to set the light ON, the light status is not updated in HG. I mean the light is ON but in HG the light is OFF.
When actionning the mounting wall, I received Zwave Wake up Notification, but this update the status for Zwave Node2 the mounting wall switch, but not the Zwave node4 (light). How can I manage to update the status of node4 ?
Regards
-
I know this is an old topic, but I'm having a very similar issue with a TKB TZ68.
I can control the device from HG, but controlling it manually doesn't update the status on HG
Did you ever resolve this?
-
I have the same with my Everspring AN157 switch. Did work in an earlier version with the wake up poll but not any more so something must have happened in the z-wave lib.