more G-Labs products

Author Topic: How do i get the energy chart to work?  (Read 5377 times)

September 27, 2015, 09:01:02 AM
Reply #15

naps1saps

  • ***
  • Information
  • Full Member
  • Posts: 79
I see you have it working which is nice.  Can you post your json file for the 0009 device?  Even my Aeon Labs switching outlet does not record usage data to the graph when it is on.

I have some troubleshooting information here:
http://www.homegenie.it/forum/index.php?topic=964.0

September 27, 2015, 07:34:18 PM
Reply #16

dani

  • *****
  • Information
  • Global Moderator
  • Posts: 535
I dn't have that sensor (0009) so i never works on is json file. If you have it technical sheet you can post and i can see what I can do for that json file.
The technical sheet explains every parameters of any zwave equipment. Habitually it send with the module.

September 27, 2015, 10:47:24 PM
Reply #17

naps1saps

  • ***
  • Information
  • Full Member
  • Posts: 79
Mine works but nothing gets recorded and I can't figure out why.

October 16, 2015, 07:52:52 AM
Reply #18

naps1saps

  • ***
  • Information
  • Full Member
  • Posts: 79
So I finally got it to work.  VirtualMeter.Watts value needs to be a HEM variable number like 111 or 101.  I also installed HG v1.1. I also updated my HEM firmware to 3.61.

Also fixed the json file while I was at it and it now works properly in the setup displaying ranges and text with a dropdown box.

November 28, 2015, 03:44:36 PM
Reply #19

sungkhum

  • *
  • Information
  • Newbie
  • Posts: 17
I'm new to this.
I have the HEMG2 but with only one clamp because I am on 220v (in Asia).

The Meter.KilowattHour gives a value that seems correct, but I can't seem to get the graph to work.

I tried to follow the instructions here in this thread, but I am not quite sure what to do with the json file.

Any help would be much appreciated. Thanks!

November 28, 2015, 04:58:56 PM
Reply #20

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Hi sungkhum,

you've to enable Watt reporting on your device.
This is an example for AEON multilevel switch with metering:

http://www.homegenie.it/forum/index.php?topic=1208.msg7674#msg7674

g.

November 28, 2015, 05:38:28 PM
Reply #21

sungkhum

  • *
  • Information
  • Newbie
  • Posts: 17
Thanks Gene,

I changed the options to match those you gave, but there is no variable for 80.

There is an option for 13: Enable /disable reporting CRC-16 Encapsulation Command

Any ideas?

November 28, 2015, 06:17:39 PM
Reply #22

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Thanks Gene,

I changed the options to match those you gave, but there is no variable for 80.

There is an option for 13: Enable /disable reporting CRC-16 Encapsulation Command

Any ideas?


configuration options are different from device to device. See your device documentation for further info.

g.

November 30, 2015, 02:14:58 AM
Reply #23

sungkhum

  • *
  • Information
  • Newbie
  • Posts: 17
Thanks - after messing around a bit I got it to work!