more G-Labs products
« previous next »
Pages: [1] 2   Go Down

Author Topic: r503; z-wave parameters not correct  (Read 3907 times)

November 25, 2015, 09:54:26 PM
Read 3907 times

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
r503; z-wave parameters not correct
My everspring sensor (SP103) is reporting motion under luminance and a smoke alarm. Both parameters are not possible with this sensor so it looks like mapping is not correct?

Regards
Pim
Logged
November 26, 2015, 01:32:17 AM
Reply #1

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Re: r503; z-wave parameters not correct
please post the debug log as you did with the other message.

g.
Logged
November 26, 2015, 08:44:29 AM
Reply #2

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
Re: r503; z-wave parameters not correct
Will check and upload in the next days...
Logged
November 26, 2015, 10:08:57 PM
Reply #3

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
Re: r503; z-wave parameters not correct
Find my logs below. Devices:
- 2     Aeon labs multi sensor
- 4     Fibaro in wall switch
- 5     POP switch
- 6     Everspring SP103 motion sensor

2015-11-26 21:18:54.6777 Debug 01-08-00-04-00-02-02-84-07-70
2015-11-26 21:18:54.6787 Debug 06
2015-11-26 21:18:54.6793 Debug 2 WakeUpSleepingStatus 0
2015-11-26 21:18:54.6815 Trace Sending message 0 01-09-00-13-02-02-80-02-05-23-41
2015-11-26 21:18:54.6833 Debug 2 WakeUpNotify 1
"2015-11-26 21:18:54.6842 Info HomeAutomation.ZWave   2   ZWave Node   ZWaveNode.WakeUpSleepingStatus   0"
"2015-11-26 21:18:54.6874 Info HomeAutomation.ZWave   2   ZWave Node   ZWaveNode.WakeUpNotify   1"
2015-11-26 21:18:54.9640 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:18:54.9640 Trace WaitAck
2015-11-26 21:18:54.9650 Trace Sending Message (Node=2
2015-11-26 21:18:54.9650 Debug 01-09-00-13-02-02-80-02-05-26-44
2015-11-26 21:18:54.9878 Debug 06-01-04-01-13-01-E8
2015-11-26 21:18:54.9887 Debug 06
2015-11-26 21:18:54.9891 Trace SendDataReady
2015-11-26 21:18:55.0899 Debug 01-07-00-13-26-00-00-02-CF
2015-11-26 21:18:55.0909 Debug 06
2015-11-26 21:18:55.0909 Trace Error
2015-11-26 21:18:55.0922 Trace [[[ END REQUEST ]]] took 127 ms
2015-11-26 21:18:55.0922 Warn Could not deliver message to Node 2 (CallbackId=26
"2015-11-26 21:18:54.7621 Info HomeAutomation.HomeGenie.Automation   91   Automation Program   Program.Notification   {""Title"":""Z-Wave Node WakeUp"""
2015-11-26 21:18:55.1932 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:18:55.1932 Trace WaitAck
2015-11-26 21:18:55.1943 Trace Sending Message (Node=2
2015-11-26 21:18:55.1950 Debug 01-09-00-13-02-02-80-02-05-26-44
2015-11-26 21:18:55.2958 Debug 06-01-04-01-13-01-E8
2015-11-26 21:18:55.2968 Debug 06
2015-11-26 21:18:55.2973 Trace SendDataReady
2015-11-26 21:18:55.2982 Debug 01-07-00-13-26-00-00-02
2015-11-26 21:18:55.2991 Debug 15
2015-11-26 21:18:55.2991 Warn Bad message checksum
2015-11-26 21:18:55.2999 Debug CF
2015-11-26 21:18:55.2999 Warn Unhandled message type: CF
2015-11-26 21:18:55.3012 Debug 01-07-00-13-26-00-00-02-CF
2015-11-26 21:18:55.3022 Debug 06
2015-11-26 21:18:55.3022 Trace Error
2015-11-26 21:18:55.3034 Trace [[[ END REQUEST ]]] took 109 ms
2015-11-26 21:18:55.3034 Warn Could not deliver message to Node 2 (CallbackId=26
2015-11-26 21:18:55.4043 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:18:55.4043 Trace WaitAck
2015-11-26 21:18:55.4053 Trace Sending Message (Node=2
2015-11-26 21:18:55.4060 Debug 01-09-00-13-02-02-80-02-05-26-44
2015-11-26 21:18:55.5067 Debug 06-01-04-01-13-01-E8
2015-11-26 21:18:55.5076 Debug 06
2015-11-26 21:18:55.5575 Trace SendDataReady
2015-11-26 21:18:55.5581 Debug 01-07-00-13-26-00-00-02-CF
2015-11-26 21:18:55.5590 Debug 06
2015-11-26 21:18:55.5590 Trace Error
2015-11-26 21:18:55.5601 Trace [[[ END REQUEST ]]] took 155 ms
2015-11-26 21:18:55.5601 Warn Delivery of message to Node 2 failed (CallbackId=26).
2015-11-26 21:18:55.5611 Debug 2 Error
2015-11-26 21:18:55.5630 Warn Node is flagged as sleeping
2015-11-26 21:18:55.5630 Trace Adding message 01-09-00-13-02-02-80-02-05-26-44
2015-11-26 21:18:55.5640 Debug 2 WakeUpSleepingStatus 1
"2015-11-26 21:18:55.5652 Info HomeAutomation.ZWave   2   Z-Wave Node   Status.Error   Response timeout!"
"2015-11-26 21:18:55.5668 Info HomeAutomation.ZWave   2   ZWave Node   ZWaveNode.WakeUpSleepingStatus   1"
2015-11-26 21:18:55.6668 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:18:55.6673 Trace WaitAck
2015-11-26 21:18:55.6673 Trace Sending Message (Node=2
2015-11-26 21:18:55.6684 Debug 01-09-00-13-02-02-80-02-05-27-45
2015-11-26 21:18:55.7629 Debug 01-09-00-04-00-02-03-80-03-54-24-18
2015-11-26 21:18:55.7629 Debug 06
2015-11-26 21:18:55.7643 Debug 2 Battery 84
"2015-11-26 21:18:55.7669 Info HomeAutomation.ZWave   2   ZWave Node   ZWaveNode.Battery   84"
2015-11-26 21:18:55.7692 Trace Error
2015-11-26 21:18:55.7702 Trace [[[ END REQUEST ]]] took 102 ms
2015-11-26 21:18:55.7702 Warn Could not deliver message to Node 2 (CallbackId=27
"2015-11-26 21:18:55.7715 Info HomeAutomation.ZWave   2   ZWave Node   Status.Battery   84"
2015-11-26 21:18:55.8711 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:18:55.8711 Trace WaitAck
2015-11-26 21:18:55.8726 Trace Sending Message (Node=2
2015-11-26 21:18:55.8734 Debug 01-09-00-13-02-02-80-02-05-27-45
2015-11-26 21:18:55.9703 Debug 06-01-04-01-13-01-E8
2015-11-26 21:18:55.9712 Debug 06
2015-11-26 21:18:55.9712 Trace SendDataReady
2015-11-26 21:18:55.9726 Debug 01-07-00-13-27-00-00-02
2015-11-26 21:18:55.9735 Debug 15
2015-11-26 21:18:55.9735 Warn Bad message checksum
2015-11-26 21:18:55.9742 Debug CE
2015-11-26 21:18:55.9761 Warn Unhandled message type: CE
2015-11-26 21:18:55.9761 Debug 01-07-00-13-27-00-00-02-CE
2015-11-26 21:18:55.9776 Debug 06
2015-11-26 21:18:55.9780 Trace Error
2015-11-26 21:18:55.9780 Trace [[[ END REQUEST ]]] took 107 ms
2015-11-26 21:18:55.9791 Warn Could not deliver message to Node 2 (CallbackId=27
2015-11-26 21:18:56.0796 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:18:56.0801 Trace WaitAck
2015-11-26 21:18:56.0801 Trace Sending Message (Node=2
2015-11-26 21:18:56.0815 Debug 01-09-00-13-02-02-80-02-05-27-45
2015-11-26 21:18:56.1825 Debug 06-01-04-01-13-01-E8
2015-11-26 21:18:56.1838 Debug 06
2015-11-26 21:18:56.1844 Trace SendDataReady
2015-11-26 21:18:56.1856 Debug 01-07-00-13-27-00-00-02-CE
2015-11-26 21:18:56.1867 Debug 06
2015-11-26 21:18:56.1874 Trace Error
2015-11-26 21:18:56.1883 Trace [[[ END REQUEST ]]] took 108 ms
2015-11-26 21:18:56.1883 Warn Delivery of message to Node 2 failed (CallbackId=27).
2015-11-26 21:18:56.1892 Debug 2 Error
2015-11-26 21:18:56.1922 Warn Node is flagged as sleeping
2015-11-26 21:18:56.1933 Trace Removing old message 01-09-00-13-02-02-80-02-05-26-44
2015-11-26 21:18:56.1940 Trace Adding message 01-09-00-13-02-02-80-02-05-27-45
"2015-11-26 21:18:56.1940 Info HomeAutomation.ZWave   2   Z-Wave Node   Status.Error   Response timeout!"
2015-11-26 21:18:56.5923 Debug 01-09-00-04-00-02-03-80-03-53-23
2015-11-26 21:18:56.5937 Debug 06
2015-11-26 21:18:56.5945 Debug 2 Battery 83
"2015-11-26 21:18:56.5970 Info HomeAutomation.ZWave   2   ZWave Node   ZWaveNode.Battery   83"
"2015-11-26 21:18:56.5991 Info HomeAutomation.ZWave   2   ZWave Node   Status.Battery   83"
2015-11-26 21:20:00.8962 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:20:00.8962 Trace WaitAck
2015-11-26 21:20:00.8973 Trace Sending Message (Node=4
2015-11-26 21:20:00.8980 Debug 01-09-00-13-04-02-20-02-05-28-EC
2015-11-26 21:20:00.9073 Debug 06-01-04-01-13-01-E8
2015-11-26 21:20:00.9081 Debug 06
2015-11-26 21:20:00.9081 Trace SendDataReady
2015-11-26 21:20:01.0092 Debug 01-07-00-13-28-00-00-02-C1
2015-11-26 21:20:01.0103 Debug 06
2015-11-26 21:20:01.0103 Trace Error
2015-11-26 21:20:01.0116 Trace [[[ END REQUEST ]]] took 114 ms
2015-11-26 21:20:01.0122 Warn Could not deliver message to Node 4 (CallbackId=28
2015-11-26 21:20:01.0122 Debug 01-09-00-04-00-04-03-20-03-FF-29
2015-11-26 21:20:01.0137 Debug 06
2015-11-26 21:20:01.0142 Debug 4 Level 255
"2015-11-26 21:20:01.0172 Info HomeAutomation.ZWave   4   ZWave Node   Status.Level   1"
"2015-11-26 21:20:01.0192 Info HomeAutomation.ZWave   4   ZWave Node   ZWaveNode.Basic   255"
2015-11-26 21:20:01.1128 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:20:01.1133 Trace WaitAck
2015-11-26 21:20:01.1133 Trace Sending Message (Node=4
2015-11-26 21:20:01.1145 Debug 01-09-00-13-04-02-20-02-05-28-EC
2015-11-26 21:20:01.1193 Debug 06
2015-11-26 21:20:01.1193 Debug 01-04-01-13-01-E8
2015-11-26 21:20:01.1206 Debug 06
2015-11-26 21:20:01.1211 Trace SendDataReady
2015-11-26 21:20:01.2220 Debug 01-07-00-13-28-00-00-02-C1
2015-11-26 21:20:01.2230 Debug 06
2015-11-26 21:20:01.2230 Trace Error
2015-11-26 21:20:01.2242 Trace [[[ END REQUEST ]]] took 110 ms
2015-11-26 21:20:01.2242 Warn Could not deliver message to Node 4 (CallbackId=28
2015-11-26 21:20:01.2255 Debug 01-09-00-04-00-04-03-20-03-FF-29
2015-11-26 21:20:01.2264 Debug 06
2015-11-26 21:20:01.2269 Debug 4 Level 255
"2015-11-26 21:20:01.2294 Info HomeAutomation.ZWave   4   ZWave Node   Status.Level   1"
"2015-11-26 21:20:01.2313 Info HomeAutomation.ZWave   4   ZWave Node   ZWaveNode.Basic   255"
2015-11-26 21:20:01.3254 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:20:01.3254 Trace WaitAck
2015-11-26 21:20:01.3264 Trace Sending Message (Node=4
2015-11-26 21:20:01.3271 Debug 01-09-00-13-04-02-20-02-05-28-EC
2015-11-26 21:20:01.3314 Debug 06
2015-11-26 21:20:01.4323 Debug 01-04-01-13-01-E8
2015-11-26 21:20:01.4333 Debug 06
2015-11-26 21:20:01.4333 Trace SendDataReady
2015-11-26 21:20:01.5345 Debug 01-07-00-13-28-00-00-02-C1
2015-11-26 21:20:01.5356 Debug 06
2015-11-26 21:20:01.5359 Trace Error
2015-11-26 21:20:01.5359 Trace [[[ END REQUEST ]]] took 210 ms
2015-11-26 21:20:01.5375 Warn Delivery of message to Node 4 failed (CallbackId=28).
2015-11-26 21:20:01.5379 Debug 4 Error
2015-11-26 21:20:01.5392 Debug 01-09-00-04-00-04-03-20-03-FF-29
2015-11-26 21:20:01.5401 Debug 06
2015-11-26 21:20:01.5401 Debug 4 Level 255
"2015-11-26 21:20:01.5426 Info HomeAutomation.ZWave   4   Z-Wave Node   Status.Error   Response timeout!"
"2015-11-26 21:20:01.5443 Info HomeAutomation.ZWave   4   ZWave Node   Status.Level   1"
"2015-11-26 21:20:01.5494 Info HomeAutomation.ZWave   4   ZWave Node   ZWaveNode.Basic   255"
2015-11-26 21:20:01.6427 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:20:01.6431 Trace WaitAck
2015-11-26 21:20:01.6431 Trace Sending Message (Node=5
2015-11-26 21:20:01.6442 Debug 01-09-00-13-05-02-20-02-05-29-EC
2015-11-26 21:20:01.6493 Debug 06
2015-11-26 21:20:01.6499 Debug 01-04-01-13-01-E8
2015-11-26 21:20:01.6499 Debug 06
2015-11-26 21:20:01.6512 Trace SendDataReady
2015-11-26 21:20:01.7520 Debug 01-07-00-13-29-00-00-02-C0
2015-11-26 21:20:01.7530 Debug 06
2015-11-26 21:20:01.7530 Trace Error
2015-11-26 21:20:01.7546 Trace [[[ END REQUEST ]]] took 111 ms
2015-11-26 21:20:01.7550 Warn Could not deliver message to Node 5 (CallbackId=29
2015-11-26 21:20:01.7550 Debug 01-09-00-04-00-05-03-20-03-00-D7
2015-11-26 21:20:01.7565 Debug 06
2015-11-26 21:20:01.7570 Debug 5 Level 0
"2015-11-26 21:20:01.7593 Info HomeAutomation.ZWave   5   ZWave Node   Status.Level   0"
"2015-11-26 21:20:01.7614 Info HomeAutomation.ZWave   5   ZWave Node   ZWaveNode.Basic   0"
2015-11-26 21:20:01.8555 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:20:01.8560 Trace WaitAck
2015-11-26 21:20:01.8560 Trace Sending Message (Node=5
2015-11-26 21:20:01.8573 Debug 01-09-00-13-05-02-20-02-05-29-EC
2015-11-26 21:20:01.8615 Debug 06
2015-11-26 21:20:01.9624 Debug 01-04-01-13-01-E8
2015-11-26 21:20:01.9714 Debug 06
2015-11-26 21:20:01.9722 Trace SendDataReady
2015-11-26 21:20:01.9732 Debug 01-07-00-13-29-00-00-02-C0
2015-11-26 21:20:01.9744 Debug 06
2015-11-26 21:20:01.9750 Trace Error
2015-11-26 21:20:01.9762 Trace [[[ END REQUEST ]]] took 120 ms
2015-11-26 21:20:01.9762 Warn Could not deliver message to Node 5 (CallbackId=29
2015-11-26 21:20:01.9776 Debug 01-09-00-04-00-05-03-20-03-00-D7
2015-11-26 21:20:01.9788 Debug 06
2015-11-26 21:20:01.9796 Debug 5 Level 0
"2015-11-26 21:20:01.9822 Info HomeAutomation.ZWave   5   ZWave Node   Status.Level   0"
"2015-11-26 21:20:01.9844 Info HomeAutomation.ZWave   5   ZWave Node   ZWaveNode.Basic   0"
2015-11-26 21:20:02.0772 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:20:02.0772 Trace WaitAck
2015-11-26 21:20:02.0781 Trace Sending Message (Node=5
2015-11-26 21:20:02.0781 Debug 01-09-00-13-05-02-20-02-05-29-EC
2015-11-26 21:20:02.0845 Debug 06-01-04-01-13-01-E8
2015-11-26 21:20:02.0854 Debug 06
2015-11-26 21:20:02.0854 Trace SendDataReady
2015-11-26 21:20:02.1865 Debug 01-07-00-13-29-00-00-01-C3
2015-11-26 21:20:02.1878 Debug 06
2015-11-26 21:20:02.1884 Trace Error
2015-11-26 21:20:02.1899 Trace [[[ END REQUEST ]]] took 112 ms
2015-11-26 21:20:02.1899 Warn Delivery of message to Node 5 failed (CallbackId=29).
2015-11-26 21:20:02.1899 Debug 5 Error
2015-11-26 21:20:02.1925 Debug 01-09-00-04-00-05-03-20-03-00-D7
2015-11-26 21:20:02.1940 Debug 06
2015-11-26 21:20:02.1940 Debug 5 Level 0
"2015-11-26 21:20:02.1969 Info HomeAutomation.ZWave   5   Z-Wave Node   Status.Error   Response timeout!"
"2015-11-26 21:20:02.1993 Info HomeAutomation.ZWave   5   ZWave Node   Status.Level   0"
"2015-11-26 21:20:02.2045 Info HomeAutomation.ZWave   5   ZWave Node   ZWaveNode.Basic   0"
2015-11-26 21:30:02.8037 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:30:02.8115 Trace WaitAck
2015-11-26 21:30:02.8191 Trace Sending Message (Node=4
2015-11-26 21:30:02.8191 Debug 01-09-00-13-04-02-20-02-05-2A-EE
2015-11-26 21:30:02.8337 Debug 06-01-04-01-13-01-E8
2015-11-26 21:30:02.8346 Debug 06
2015-11-26 21:30:02.8350 Trace SendDataReady
2015-11-26 21:30:02.9357 Debug 01-07-00-13-2A-00-00-01-C0
2015-11-26 21:30:02.9370 Debug 06
2015-11-26 21:30:02.9370 Trace Error
2015-11-26 21:30:02.9386 Trace [[[ END REQUEST ]]] took 127 ms
2015-11-26 21:30:02.9391 Warn Could not deliver message to Node 4 (CallbackId=2A
2015-11-26 21:30:02.9399 Debug 01-09-00-04-00-04-03-20-03-FF-29
2015-11-26 21:30:02.9411 Debug 06
2015-11-26 21:30:02.9420 Debug 4 Level 255
"2015-11-26 21:30:02.9452 Info HomeAutomation.ZWave   4   ZWave Node   Status.Level   1"
"2015-11-26 21:30:02.9474 Info HomeAutomation.ZWave   4   ZWave Node   ZWaveNode.Basic   255"
2015-11-26 21:30:03.0397 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:30:03.0401 Trace WaitAck
2015-11-26 21:30:03.0401 Trace Sending Message (Node=4
2015-11-26 21:30:03.0412 Debug 01-09-00-13-04-02-20-02-05-2A-EE
2015-11-26 21:30:03.0477 Debug 06-01-04-01-13-01-E8
2015-11-26 21:30:03.0487 Debug 06
2015-11-26 21:30:03.0491 Trace SendDataReady
2015-11-26 21:30:03.1498 Debug 01-07-00-13-2A-00-00-02-C3
2015-11-26 21:30:03.1511 Debug 06
2015-11-26 21:30:03.1511 Trace Error
2015-11-26 21:30:03.1531 Trace [[[ END REQUEST ]]] took 113 ms
2015-11-26 21:30:03.1531 Warn Could not deliver message to Node 4 (CallbackId=2A
2015-11-26 21:30:03.1544 Debug 01-09-00-04-00-04-03-20-03-FF-29
2015-11-26 21:30:03.1555 Debug 06
2015-11-26 21:30:03.1571 Debug 4 Level 255
"2015-11-26 21:30:03.1598 Info HomeAutomation.ZWave   4   ZWave Node   Status.Level   1"
"2015-11-26 21:30:03.1622 Info HomeAutomation.ZWave   4   ZWave Node   ZWaveNode.Basic   255"
2015-11-26 21:30:03.2541 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:30:03.2541 Trace WaitAck
2015-11-26 21:30:03.2551 Trace Sending Message (Node=4
2015-11-26 21:30:03.2551 Debug 01-09-00-13-04-02-20-02-05-2A-EE
2015-11-26 21:30:03.2624 Debug 06-01-04-01-13-01-E8
2015-11-26 21:30:03.2632 Debug 06
2015-11-26 21:30:03.2632 Trace SendDataReady
2015-11-26 21:30:03.3644 Debug 01-07-00-13-2A-00-00-02-C3
2015-11-26 21:30:03.3658 Debug 06
2015-11-26 21:30:03.3664 Trace Error
2015-11-26 21:30:03.3676 Trace [[[ END REQUEST ]]] took 112 ms
2015-11-26 21:30:03.3686 Warn Delivery of message to Node 4 failed (CallbackId=2A).
2015-11-26 21:30:03.3693 Debug 4 Error
2015-11-26 21:30:03.3708 Debug 01-09-00-04-00-04-03-20-03-FF-29
2015-11-26 21:30:03.3721 Debug 06
2015-11-26 21:30:03.3721 Debug 4 Level 255
"2015-11-26 21:30:03.3744 Info HomeAutomation.ZWave   4   Z-Wave Node   Status.Error   Response timeout!"
"2015-11-26 21:30:03.3780 Info HomeAutomation.ZWave   4   ZWave Node   Status.Level   1"
"2015-11-26 21:30:03.3834 Info HomeAutomation.ZWave   4   ZWave Node   ZWaveNode.Basic   255"
2015-11-26 21:30:03.4746 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:30:03.4751 Trace WaitAck
2015-11-26 21:30:03.4751 Trace Sending Message (Node=5
2015-11-26 21:30:03.4762 Debug 01-09-00-13-05-02-20-02-05-2B-EE
2015-11-26 21:30:03.4837 Debug 06-01-04-01-13-01-E8
2015-11-26 21:30:03.4848 Debug 06
2015-11-26 21:30:03.4854 Trace SendDataReady
2015-11-26 21:30:03.5861 Debug 01-07-00-13-2B-00-00-02-C2
2015-11-26 21:30:03.5870 Debug 06
2015-11-26 21:30:03.5870 Trace Error
2015-11-26 21:30:03.5887 Trace [[[ END REQUEST ]]] took 113 ms
2015-11-26 21:30:03.5892 Warn Could not deliver message to Node 5 (CallbackId=2B
2015-11-26 21:30:03.5901 Debug 01-09-00-04-00-05-03-20-03-00-D7
2015-11-26 21:30:03.5912 Debug 06
2015-11-26 21:30:03.5921 Debug 5 Level 0
"2015-11-26 21:30:03.5951 Info HomeAutomation.ZWave   5   ZWave Node   Status.Level   0"
"2015-11-26 21:30:03.5974 Info HomeAutomation.ZWave   5   ZWave Node   ZWaveNode.Basic   0"
2015-11-26 21:30:03.6898 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:30:03.6903 Trace WaitAck
2015-11-26 21:30:03.6903 Trace Sending Message (Node=5
2015-11-26 21:30:03.6914 Debug 01-09-00-13-05-02-20-02-05-2B-EE
2015-11-26 21:30:03.6974 Debug 06-01-04-01-13-01-E8
2015-11-26 21:30:03.6982 Debug 06
2015-11-26 21:30:03.6982 Trace SendDataReady
2015-11-26 21:30:03.7994 Debug 01-07-00-13-2B-00-00-02-C2
2015-11-26 21:30:03.8004 Debug 06
2015-11-26 21:30:03.8004 Trace Error
2015-11-26 21:30:03.8018 Trace [[[ END REQUEST ]]] took 111 ms
2015-11-26 21:30:03.8024 Warn Could not deliver message to Node 5 (CallbackId=2B
2015-11-26 21:30:03.8029 Debug 01-09-00-04-00-05-03-20-03-00-D7
2015-11-26 21:30:03.8029 Debug 06
2015-11-26 21:30:03.8044 Debug 5 Level 0
"2015-11-26 21:30:03.8081 Info HomeAutomation.ZWave   5   ZWave Node   Status.Level   0"
"2015-11-26 21:30:03.8116 Info HomeAutomation.ZWave   5   ZWave Node   ZWaveNode.Basic   0"
2015-11-26 21:30:03.9029 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:30:03.9029 Trace WaitAck
2015-11-26 21:30:03.9040 Trace Sending Message (Node=5
2015-11-26 21:30:03.9040 Debug 01-09-00-13-05-02-20-02-05-2B-EE
2015-11-26 21:30:03.9121 Debug 06-01-04-01-13-01-E8
2015-11-26 21:30:03.9131 Debug 06
2015-11-26 21:30:03.9131 Trace SendDataReady
2015-11-26 21:30:04.0145 Debug 01-07-00-13-2B-00-00-02-C2
2015-11-26 21:30:04.0157 Debug 06
2015-11-26 21:30:04.0164 Trace Error
2015-11-26 21:30:04.0182 Trace [[[ END REQUEST ]]] took 114 ms
2015-11-26 21:30:04.0189 Warn Delivery of message to Node 5 failed (CallbackId=2B).
2015-11-26 21:30:04.0189 Debug 5 Error
2015-11-26 21:30:04.0205 Debug 01-09-00-04-00-05-03-20-03-00-D7
2015-11-26 21:30:04.0216 Debug 06
2015-11-26 21:30:04.0223 Debug 5 Level 0
"2015-11-26 21:30:04.0242 Info HomeAutomation.ZWave   5   Z-Wave Node   Status.Error   Response timeout!"
"2015-11-26 21:30:04.0265 Info HomeAutomation.ZWave   5   ZWave Node   Status.Level   0"
"2015-11-26 21:30:04.0325 Info HomeAutomation.ZWave   5   ZWave Node   ZWaveNode.Basic   0"
2015-11-26 21:30:54.6858 Debug 01-08-00-04-00-02-02-84-07-70
2015-11-26 21:30:54.6869 Debug 06
2015-11-26 21:30:54.6875 Debug 2 WakeUpSleepingStatus 0
2015-11-26 21:30:54.6895 Trace Sending message 0 01-09-00-13-02-02-80-02-05-27-45
2015-11-26 21:30:54.6907 Debug 2 WakeUpNotify 1
"2015-11-26 21:30:54.6922 Info HomeAutomation.ZWave   2   ZWave Node   ZWaveNode.WakeUpSleepingStatus   0"
"2015-11-26 21:30:54.6953 Info HomeAutomation.ZWave   2   ZWave Node   ZWaveNode.WakeUpNotify   1"
"2015-11-26 21:30:54.7692 Info HomeAutomation.HomeGenie.Automation   91   Automation Program   Program.Notification   {""Title"":""Z-Wave Node WakeUp"""
2015-11-26 21:30:55.1899 Trace [[[ BEGIN REQUEST ]]]
2015-11-26 21:30:55.1899 Trace WaitAck
2015-11-26 21:30:55.1910 Trace Sending Message (Node=2
2015-11-26 21:30:55.1910 Debug 01-09-00-13-02-02-80-02-05-2C-4E
2015-11-26 21:30:55.1954 Debug 06
2015-11-26 21:30:55.2962 Debug 01-04-01-13-01-E8
2015-11-26 21:30:55.2973 Debug 06
2015-11-26 21:30:55.2973 Trace SendDataReady
2015-11-26 21:30:55.3984 Debug 01-07-00-13-2C-00-00-02-C5
2015-11-26 21:30:55.3995 Debug 06
2015-11-26 21:30:55.3999 Trace Error
2015-11-26 21:30:55.3999 Trace [[[ END REQUEST ]]] took 210 ms
2015-11-26 21:30:55.4011 Warn Could not deliver message to Node 2 (CallbackId=2C
Logged
November 26, 2015, 11:34:10 PM
Reply #4

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Re: r503; z-wave parameters not correct
Hi pim,

I guess you're using ZWaveLib included in r503.
Can you try the new dll that I posted here:

http://www.homegenie.it/forum/index.php?topic=1218.msg7712#msg7712

ensure not to have any other ZWaveLib.dll in the main homegenie folder nor in the homegenie/lib folder.
This file must be copied over the one in the homegenie/lib/mig folder.
Post the logs after testing.

Thanks,
g.
Logged
November 28, 2015, 11:10:13 AM
Reply #5

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
Re: r503; z-wave parameters not correct
Hi Gene,

Thanks for your efforts to get z-wave up and running. Just recently figured out that the protocol is proprietary and specs are not publicly available. Maybe below is usefull (if you dont already have seen this):
http://www.openzwave.com/

I have replaced the ZWavelib.dll with latest provided and attached are my logs with comments inside. Most of it seems to work now, except for the fact that some variables seem to show up incorrectly. For example tamper variable is shown for multisensor while this sensor does not have tamper detection.

Cheers
Pim
Logged
November 28, 2015, 02:43:49 PM
Reply #6

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Re: r503; z-wave parameters not correct
Hi pim what kind of controller are you using?

I don't see any "Sensor.Luminance" value reported by HG, so if you see that value it must be come from some previous buggy release. So you can delete that field from the module by going to the Configure->Group section and clicking the button on the right of the module.

When you see "Expected message length ..." message, it means that data from serial port is not coming as fast as expected and that the complete message is fragmented in two ore more packets, but that's ok now since the new zwavelib is merging messages intead of trying to process them after each read.

The Sensor.Tamper event is coming from this message:

2015-11-28 10:33:22.6146 Debug 01-11-00-04-00-02-0B-71-05-00-00-00-FF-07-07-01-07-00-6E
2015-11-28 10:33:22.6155 Debug 06                                             
2015-11-28 10:33:22.6404 Debug 2 AlarmTampered 7                                             
2015-11-28 10:33:22.6542 Info HomeAutomation.ZWave   2   ZWave Node   Sensor.Tamper   7

Where 0x71 is the Sensor Alarm class and 0x07 is the type (Burglar I think). What kind of sensor is this node 2?
Would it make more sense having this field mapped to a Sensor.Burglar field? What the value of this fields mean (0x07)?

The errors you see during hg startup are due to the fact that some automation program is trying to access Z-Wave nodes prior to zwave initialization (discovery) and so before nodes are populated.

g.
Logged
November 28, 2015, 03:02:37 PM
Reply #7

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Re: r503; z-wave parameters not correct
I found this:

https://github.com/OpenZWave/open-zwave/issues/552#issuecomment-102028655

it seems like those kind of alarm types are not standardized but rather are vendor dependant.
Can you try acting on the sensor in order to trigger all possible values and paste the output with action descriptions here?
So I can try to map them in the most generic way I can figure out.

g.
Logged
November 28, 2015, 05:44:51 PM
Reply #8

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
Re: r503; z-wave parameters not correct
Hi Gene,

I am using a Razberry controller on RPI.

The sensors I am using are:
- node 6, Everspring SP103, motion with tamper detect, http://www.slideshare.net/domoticadavinci/everspring-sp103-manual
- node 2, Aeotec Multi Sensor 5, motion/luma/humidity/temperature (no tamper), http://aeotec.com/z-wave-sensor/47-multisensor-manual.html

Will try and act on node 2 later to get all possible values.

Cheers,
Pim
Logged
November 29, 2015, 04:47:14 PM
Reply #9

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
Re: r503; z-wave parameters not correct
Gene,

Tried to get all parameter values from top to bottom on multisensor (node 2) as per below config screen. Difficult to achieve due to lots of timeouts...

regards
Pim
Logged
December 01, 2015, 11:10:26 PM
Reply #10

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
Re: r503; z-wave parameters not correct
Found below document that list all available command classes. Maybe this helps:
http://razberry.z-wave.me/docs/zwayDev.pdf

How is below message to be read?

2015-11-28 10:33:22.6146 Debug 01-11-00-04-00-02-0B-71-05-00-00-00-FF-07-07-01-07-00-6E

From attached document, table 8-2 I can see that the first 6 bytes are home, source and dest IDs. Byte 7 is the number of bytes in the MSDU.

I assume that byte 8 is the command class (alarm in this case) as specified in the zway doc referred to above (paragraph 7.2).

What is byte 9, 10, 111, 12, 13?
Logged
December 02, 2015, 01:24:22 AM
Reply #11

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Re: r503; z-wave parameters not correct
Hi Pim,

did you install r504? I already made some modification to the Alarm Command Class (V2):

modifications
https://github.com/genielabs/zwave-lib-dotnet/commit/c38f0920f188b61783da2b7822c46c2f7a303343#diff-957f08b6284a71dfa125e78ea83c21cbL47

complete file - code of interest at line #85 and #127
https://github.com/genielabs/zwave-lib-dotnet/blob/master/ZWaveLib/Values/AlarmValue.cs#L85
https://github.com/genielabs/zwave-lib-dotnet/blob/master/ZWaveLib/Values/AlarmValue.cs#L127

known type of alarm event
https://github.com/genielabs/zwave-lib-dotnet/blob/master/ZWaveLib/Values/AlarmValue.cs#L50

as you can see in the last link, I added 0x07 --> HomeSecurityMotion event.
So this is how it should be interpreted now the byte sequence:
2015-11-28 10:33:22.6146 Debug 01-11-00-04-00-02-0B-71-05-00-00-00-FF-07-07-01-07-00-6E

0xFF = 255 = ON (I guess it goes to 0x00 when motion is off)
0x07 = Alarm Type Burglar
0x07 = Alarm Event Motion

the unknown part to me is exactly how to correctly interpret an Alarm V2 event which is contained in the last part:

00-00-00-FF-07-07-01-07-00

current code is just a guess. If any documentation about this, please let me know, I'll update the AlarmValue.cs file accordingly.

Cheers,
g.


« Last Edit: December 02, 2015, 01:26:27 AM by Gene »
Logged
December 02, 2015, 11:19:32 PM
Reply #12

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
Re: r503; z-wave parameters not correct
Hi Gene,

Was on r504 already.

Found this overview (attached).

In case v1 event is zero, the v1 status is ignored.
Byte #14 is v2 status (which is motion yes (255) or no (0)).
Byte #15 is v2 alarm type
Byte #16 is v2 event

Hope this helps.

Regards
Pim
Logged
December 02, 2015, 11:36:28 PM
Reply #13

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
Re: r503; z-wave parameters not correct
I think it's byte #13, #14 and  #15. Can you please post log from r504 of motion on / off and other sensor values?
Logged
December 03, 2015, 10:31:27 PM
Reply #14

pim555

  • ****
  • Information
  • Sr. Member
  • Posts: 143
Re: r503; z-wave parameters not correct
Here they are...first snippet is periodic sensor report and second is motion on/off.

Code: [Select]
2015-12-03 22:08:38.0619 Debug 01-09-00-04-00-02-03-80-03-4C-3C
2015-12-03 22:08:38.0628 Debug ZWaveMessage (RawData=01-09-00-04-00-02-03-80-03-4C-3C)
2015-12-03 22:08:38.0628 Debug ZWaveMessage (Direction=Inbound
2015-12-03 22:08:38.0640 Debug 06
2015-12-03 22:08:38.0645 Debug NodeUpdated (NodeId=2
"2015-12-03 22:08:38.0673 Info HomeAutomation.ZWave 2 ZWave Node ZWaveNode.Battery 76"
"2015-12-03 22:08:38.0713 Info HomeAutomation.ZWave 2 ZWave Node Status.Battery 76"
2015-12-03 22:08:38.2716 Debug 01-0C-00-04-00-02-06-31-05-03-0A-00-15-DB
2015-12-03 22:08:38.2716 Debug ZWaveMessage (RawData=01-0C-00-04-00-02-06-31-05-03-0A-00-15-DB)
2015-12-03 22:08:38.2728 Debug ZWaveMessage (Direction=Inbound
2015-12-03 22:08:38.2742 Debug 06
2015-12-03 22:08:38.2747 Debug NodeUpdated (NodeId=2
"2015-12-03 22:08:38.2771 Info HomeAutomation.ZWave 2 ZWave Node Sensor.Luminance 21"
2015-12-03 22:08:39.5793 Debug 01-0C-00-04-00-02-06-31-05-01-22-00-3F-DB
2015-12-03 22:08:39.5804 Debug ZWaveMessage (RawData=01-0C-00-04-00-02-06-31-05-01-22-00-3F-DB)
2015-12-03 22:08:39.5809 Debug ZWaveMessage (Direction=Inbound
2015-12-03 22:08:39.5817 Debug 06
2015-12-03 22:08:39.5817 Debug NodeUpdated (NodeId=2
"2015-12-03 22:08:39.5851 Info HomeAutomation.ZWave 2 ZWave Node Sensor.Temperature 6.3"
2015-12-03 22:08:39.8874 Debug 01-0C-00-04-00-02-06-31-05-05-01-55-00-96
2015-12-03 22:08:39.8882 Debug ZWaveMessage (RawData=01-0C-00-04-00-02-06-31-05-05-01-55-00-96)
2015-12-03 22:08:39.8891 Debug ZWaveMessage (Direction=Inbound
2015-12-03 22:08:39.8902 Debug 06
2015-12-03 22:08:39.8907 Debug NodeUpdated (NodeId=2
"2015-12-03 22:08:39.8937 Info HomeAutomation.ZWave 2 ZWave Node Sensor.Humidity 85"

Motion detected
Code: [Select]
2015-12-03 21:26:47.2601 Debug 01-09-00-04-00-02-03-20-01-FF-2D
2015-12-03 21:26:47.2610 Debug ZWaveMessage (RawData=01-09-00-04-00-02-03-20-01-FF-2D)
2015-12-03 21:26:47.2616 Debug ZWaveMessage (Direction=Inbound Header=SOF NodeId=2 Type=Request Function=ApplicationCommandHandler CommandClass=Basic)
2015-12-03 21:26:47.2616 Debug 06
2015-12-03 21:26:47.2630 Debug NodeUpdated (NodeId=2 Parameter=Level Value=255)
"2015-12-03 21:26:47.2661 Info HomeAutomation.ZWave 2 ZWave Node Status.Level 255"
"2015-12-03 21:26:47.2709 Info HomeAutomation.ZWave 2 ZWave Node ZWaveNode.Basic 255"
"2015-12-03 21:26:47.3678 Info HomeAutomation.HomeGenie.Automation 145 Automation Program Program.Notification {""Title"":""Smart Lights""" Message:"Tuin - Multi<br>switched ON A2 Afdak"}
2015-12-03 21:26:47.4355 Debug 04-6E
2015-12-03 21:26:47.5714 Debug 01-11-00-04-00-02-0B-71-05-00-00-00-FF-07-07-01-07-00-6E
2015-12-03 21:26:47.5722 Debug ZWaveMessage (RawData=01-11-00-04-00-02-0B-71-05-00-00-00-FF-07-07-01-07-00-6E)
2015-12-03 21:26:47.5726 Debug ZWaveMessage (Direction=Inbound Header=SOF NodeId=2 Type=Request Function=ApplicationCommandHandler CommandClass=Alarm)
2015-12-03 21:26:47.5735 Debug 06
2015-12-03 21:26:47.5735 Debug NodeUpdated (NodeId=2 Parameter=SensorMotion Value=255)
"2015-12-03 21:26:47.5763 Info HomeAutomation.ZWave 2 ZWave Node Sensor.MotionDetect 255"

Motion off
Code: [Select]
2015-12-03 21:32:45.5602 Debug 01-09-00-04-00-02-03-20-01-00-D2
2015-12-03 21:32:45.5610 Debug ZWaveMessage (RawData=01-09-00-04-00-02-03-20-01-00-D2)
2015-12-03 21:32:45.5610 Debug ZWaveMessage (Direction=Inbound Header=SOF NodeId=2 Type=Request Function=ApplicationCommandHandler CommandClass=Basic)
2015-12-03 21:32:45.5625 Debug 06
2015-12-03 21:32:45.5631 Debug NodeUpdated (NodeId=2 Parameter=Level Value=0)
"2015-12-03 21:32:45.5670 Info HomeAutomation.ZWave 2 ZWave Node Status.Level 0"
"2015-12-03 21:32:45.5701 Info HomeAutomation.ZWave 2 ZWave Node ZWaveNode.Basic 0"
2015-12-03 21:32:45.8705 Debug 01-11-00-04-00-02-0B-71-05-00-00-00-00-07-07-01-07-00-91
2015-12-03 21:32:45.8713 Debug ZWaveMessage (RawData=01-11-00-04-00-02-0B-71-05-00-00-00-00-07-07-01-07-00-91)
2015-12-03 21:32:45.8717 Debug ZWaveMessage (Direction=Inbound Header=SOF NodeId=2 Type=Request Function=ApplicationCommandHandler CommandClass=Alarm)
2015-12-03 21:32:45.8725 Debug 06
2015-12-03 21:32:45.8725 Debug NodeUpdated (NodeId=2 Parameter=SensorMotion Value=0)
"2015-12-03 21:32:45.8751 Info HomeAutomation.ZWave 2 ZWave Node Sensor.MotionDetect 0"

Regards
Pim
Logged
Pages: [1] 2   Go Up
« previous next »