HomeGenie Forum
Automation Program Plugins and Wizard Scripting => Raspberry Pi GPIO/SPI/I2C => Topic started by: dippies on July 07, 2014, 08:40:13 AM
-
Hi
i wonder if there is anybody that can help me , i tried to start the gpio module under raspberry sharp but keep on getting the lock error .
i tried to change ownership of the DIR and also tried to add rights but cant seem to get it working
any help would be greatly helpful
-
That means some other application is using one or more of the GPIO allocated by the HG GPIO program.
Check out your /etc/modules file to see if there's the LIRC driver activated on some GPIO's pin.
Then you can either turn off the LIRC driver, or set to OFF already allocated pins in the HG GPIO program.
Cheers,
g.