more G-Labs products

Author Topic: Raspberry Pi 2 + Zwave.me ZME_UZB1  (Read 5805 times)

February 16, 2015, 08:12:28 PM
Read 5805 times

pamatika

  • *
  • Information
  • Newbie
  • Posts: 8
Hi,

I can't get HG to detect my Z-WAVE usb stick (ZWAVE.ME ZME_UZB1). When plugging the stick in it will show up in dev folder with name "ttyACM0" but HG interface configuration doesn't detect the stick. Does anyone have a clue how to get that working?

Set-up: Raspberry Pi2 + 2015-01-31-raspbian + HG 478
UZB1 is working fine under Win 7 and HG 478.

Thanks for the help.

Pasi

February 19, 2015, 08:36:59 PM
Reply #1

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
The problem is that HG doesn't recognize the RPi2 hardware:

https://github.com/genielabs/HomeGenie/blob/master/HomeGenie/Service/Handlers/Config.cs#L96

it just recognize old Raspberry Pi.
File a issue on github, so I won't forget to update the code for supporting RPi2:

https://github.com/genielabs/HomeGenie/issues

g.

February 20, 2015, 03:12:30 PM
Reply #2

pamatika

  • *
  • Information
  • Newbie
  • Posts: 8

February 21, 2015, 03:24:35 PM
Reply #3

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer

February 22, 2015, 09:12:12 PM
Reply #4

pamatika

  • *
  • Information
  • Newbie
  • Posts: 8
First test was unsuccessful. No devices were visible on Z-wave settings. I had the console access through serial port disabled (does it matter?). Is the installation of "mono-complete" packet mandatory before installing HG?
I'll try fresh install tomorrow evening with different configurations.

Pasi

February 23, 2015, 06:37:37 PM
Reply #5

pamatika

  • *
  • Information
  • Newbie
  • Posts: 8
I tried couple of different settings which I though could help but i wasn't able to get HG r480 to detect UZB1 stick.
ttyACM0 shows-up in dev when UZB1 is plugged in but it's not available in HG.


Pasi

February 23, 2015, 09:08:59 PM
Reply #6

Gene

  • *****
  • Information
  • Administrator
  • Posts: 1472
  • Tangible is the future!
    • Yet Another Programmer
The bug is now fixed in latest testing release (still named r480).

Cheers,
g.

February 24, 2015, 07:46:26 PM
Reply #7

pamatika

  • *
  • Information
  • Newbie
  • Posts: 8
Tested and it works! Thank you!
Finally I can shutdown my HTPC for nights. \o/

So I can confirm that following set-up works just perfectly:
- Raspberry Pi 2
- 2015-02-16-raspbian-wheezy
- homegenie-beta_1.00.r480_all.deb
- ZWAVE.ME ZME_UZB1 - USB Adapter
- FIBARO FGWPE F-101 - Wall Plug
- FIBARO FGD-211 - Dimmer
- FIBARO FGK-101-107 - Door Sensor

Minor issue is FIBARO FGK-101-107 door switch which doesn't show correct battery level (constant 255%) but otherwise it works just fine. It would be nice feature to select correct NIF from pepper-one DB especially with these battery powered z-wave gadgets.


Pasi

February 25, 2015, 06:23:05 PM
Reply #8

gs001

  • *
  • Information
  • Newbie
  • Posts: 21
FYI, ver 480 also fixes a Raspberry Pi 2 problem I've been having - Since switching to the RasPi 2, I haven't been able to select ttyAMA0 for the X10 interface - It simply wasn't presented as an option. Now it does.

Gary Sanders