HomeGenie Forum

General Category => Troubleshooting and Support => Topic started by: ivn on August 24, 2015, 11:46:59 AM

Title: alarm system compatibility
Post by: ivn on August 24, 2015, 11:46:59 AM: Hi!!

I decided to set up an alarm system in my house, but I'm not shure of the compatibility of sensors with HG, mounted on a BananaPi.

The Controller:
http://www.amazon.es/dp/B00E965Q9G/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1Y4HQIAFF6BP2&coliid=IEXR9B12SRJO1 (http://www.amazon.es/dp/B00E965Q9G/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1Y4HQIAFF6BP2&coliid=IEXR9B12SRJO1)

Door sensor:
http://www.amazon.es/dp/B00CVVIFX0/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=1Y4HQIAFF6BP2&coliid=I3VHWTSKWPJ8DE (http://www.amazon.es/dp/B00CVVIFX0/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=1Y4HQIAFF6BP2&coliid=I3VHWTSKWPJ8DE)
OR THIS
https://www.domoticalia.es/sensores-z-wave/375-multisensor-z-wave-de-philio-4-en-1-apertura-movimiento-luminosidad-temperatura.html (https://www.domoticalia.es/sensores-z-wave/375-multisensor-z-wave-de-philio-4-en-1-apertura-movimiento-luminosidad-temperatura.html)

Motion Sensor:
http://www.amazon.es/dp/B00JHHNUPY/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=1Y4HQIAFF6BP2&coliid=INIW79RY4TLAX (http://www.amazon.es/dp/B00JHHNUPY/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=1Y4HQIAFF6BP2&coliid=INIW79RY4TLAX)

Siren/Bell
https://www.domoticalia.es/actuadores-z-wave/283-sirena-inalambrica-zwave-de-vision.html (https://www.domoticalia.es/actuadores-z-wave/283-sirena-inalambrica-zwave-de-vision.html)

Thanks!!

I'm spanish, sorry if my english is bad :p
Title: Re: alarm system compatibility
Post by: mvdarend on August 24, 2015, 12:07:33 PM: If it's a Z-wave device it should work, so all the devices you mentioned should be OK. But I haven't used any myself so I don't know if they have specific peculiarities.

By the way, the Fibaro sensor is on sale at the moment at amazon.it: (34 euro instead of 56 at amazon.es)
http://www.amazon.it/Fibaro-FGMS-001-Motion-Sensor-Z-Wave/dp/B00JHHNUPY/ (http://www.amazon.it/Fibaro-FGMS-001-Motion-Sensor-Z-Wave/dp/B00JHHNUPY/)
Title: Re: alarm system compatibility
Post by: dani on August 24, 2015, 02:51:54 PM: AeonLabs ZStick 2 works with HG on RaspberryPi (B+ or 2)
Fibaro multisensor works fine so. Only my 1rst battery is out after only 6 months of service.
I don't have any door sensor actually, but have some other ZWave manufacturer products that's work perfectly.

Cheers
Dani
Title: Re: alarm system compatibility
Post by: ivn on August 24, 2015, 03:50:03 PM: Thanks for the replies!

There are spare battery?
Or you have to buy another sensor?
Title: Re: alarm system compatibility
Post by: dani on August 24, 2015, 11:12:50 PM: Have to buy new cells every 6 Months. Around 6€
Title: Re: alarm system compatibility
Post by: ivn on August 26, 2015, 12:08:51 PM: Hi!!

I have decided and I bought the USB adapter!!

When I recibe a salary buy the door sensor.

Thanks